Linear Bearings | LM Standard Linear Bushing

LM-AJ Adjustable Clearance Series

Home > MAOZE Products > Linear Bearings > LM Standard Linear Bushing

The LM-AJ Adjustable Clearance Series features an axial slit in the outer ring allowing minor inner-diameter adjustment via an adjusting housing, used for wear compensation or preload setting.

Linear Bearings | LM Standard Linear Bushing

LM-AJ Adjustable Clearance Series

The LM-AJ Adjustable Clearance Series features an axial slit in the outer ring allowing minor inner-diameter adjustment via an adjusting housing, used for wear compensation or preload setting.

Get a Quote

Product Features

MAOZE

Features

Axial slit on outer ring for minor bore adjustment
Clearance compensation with adjusting housing
Same resin retainer construction

Model Designation

The -AJ suffix denotes the adjustable-clearance type used with adjusting housings.

Specifications

See the parameter table for detailed specifications (shaft diameter, OD, length, load ratings etc.) by model code.

Long Service Life

Stable load with evenly distributed ball force; selected bearing steel resists fatigue and extends equipment service life.

Quiet Operation

Circulating balls deliver smooth reciprocating motion, reducing metal friction noise and keeping operation quiet at high speed.

Precise Tolerance

Strict dimensional tolerance control gives excellent bore accuracy, uniform clearance with the guide shaft and high positioning precision.

Low-Friction Travel

A closed ball-circulation structure keeps rolling friction low, making reciprocating motion light and responsive with less drive loss.

Long Service Life

Stable load with evenly distributed ball force; selected bearing steel resists fatigue and extends equipment service life.

Quiet Operation

Circulating balls deliver smooth reciprocating motion, reducing metal friction noise and keeping operation quiet at high speed.

Precise Tolerance

Strict dimensional tolerance control gives excellent bore accuracy, uniform clearance with the guide shaft and high positioning precision.

Low-Friction Travel

A closed ball-circulation structure keeps rolling friction low, making reciprocating motion light and responsive with less drive loss.

Dimensional Diagram

MAOZE

Specifications Table

MAOZE

LM10-AJ

LM10-AJ Specifications Table
Parameter	Value	Unit	Note
dr	10	mm	Shaft Diameter
D	19	mm	Outer Diameter
L	29	mm	Length
B	22	mm	Width
W	1.3	mm	Raceway Width
D1	18	mm	D1 Dimension
h	1	mm	h Dimension
Ball Circuit	4	个	Ball Circuit
Weight	36	g	Weight
Eccentricity	12	μm	Eccentricity
Radial Clearance	-4	μm	Radial Clearance
C	373	N	Basic Dynamic Load Rating
Co	549	N	Basic Static Load Rating
dr Tolerance	-0.009	mm	Shaft Diameter Tolerance

LM100-AJ

LM100-AJ Specifications Table
Parameter	Value	Unit	Note
dr	100	mm	Shaft Diameter
D	150	mm	Outer Diameter
L	175	mm	Length
B	130	mm	Width
W	4.15	mm	Raceway Width
D1	145	mm	D1 Dimension
h	3	mm	h Dimension
h1	40	mm	h1 Dimension
θ	60	°	Contact Angle
Ball Circuit	6	个	Ball Circuit
Weight	8500	g	Weight
Eccentricity	30	μm	Eccentricity
Radial Clearance	-20	μm	Radial Clearance
C	14400	N	Basic Dynamic Load Rating
Co	30000	N	Basic Static Load Rating
dr Tolerance	-0.020	mm	Shaft Diameter Tolerance
D Tolerance	-0.025	mm	Outer Diameter Tolerance
L Tolerance	-0.4	mm	Length Tolerance
B Tolerance	-0.4	mm	Width Tolerance

LM12-AJ

LM12-AJ Specifications Table
Parameter	Value	Unit	Note
dr	12	mm	Shaft Diameter
D	21	mm	Outer Diameter
L	32	mm	Length
B	23	mm	Width
W	1.3	mm	Raceway Width
D1	20	mm	D1 Dimension
h	1.5	mm	h Dimension
h1	9	mm	h1 Dimension
θ	80	°	Contact Angle
Ball Circuit	4	个	Ball Circuit
Weight	42	g	Weight
Eccentricity	12	μm	Eccentricity
Radial Clearance	-4	μm	Radial Clearance
C	454	N	Basic Dynamic Load Rating
Co	795	N	Basic Static Load Rating
dr Tolerance	-0.009	mm	Shaft Diameter Tolerance
D Tolerance	-0.013	mm	Outer Diameter Tolerance
L Tolerance	-0.2	mm	Length Tolerance
B Tolerance	-0.2	mm	Width Tolerance

LM120-AJ

LM120-AJ Specifications Table
Parameter	Value	Unit	Note
dr	120	mm	Shaft Diameter
D	180	mm	Outer Diameter
L	200	mm	Length
B	158.5	mm	Width
W	5.15	mm	Raceway Width
D1	175	mm	D1 Dimension
h	3	mm	h Dimension
h1	85	mm	h1 Dimension
θ	80	°	Contact Angle
Ball Circuit	8	个	Ball Circuit
Weight	15000	g	Weight
Eccentricity	30	μm	Eccentricity
Radial Clearance	-25	μm	Radial Clearance
C	16400	N	Basic Dynamic Load Rating
dr Tolerance	-0.025	mm	Shaft Diameter Tolerance
D Tolerance	-0.029	mm	Outer Diameter Tolerance
L Tolerance	-0.4	mm	Length Tolerance
B Tolerance	-0.4	mm	Width Tolerance

LM13-AJ

LM13-AJ Specifications Table
Parameter	Value	Unit	Note
dr	13	mm	Shaft Diameter
D	23	mm	Outer Diameter
L	32	mm	Length
B	23	mm	Width
W	1.3	mm	Raceway Width
D1	22	mm	D1 Dimension
h	1.5	mm	h Dimension
h1	9	mm	h1 Dimension
θ	80	°	Contact Angle
Ball Circuit	4	个	Ball Circuit
Weight	49	g	Weight
Eccentricity	12	μm	Eccentricity
Radial Clearance	-4	μm	Radial Clearance
C	510	N	Basic Dynamic Load Rating
Co	775	N	Basic Static Load Rating
dr Tolerance	-0.011	mm	Shaft Diameter Tolerance
D Tolerance	-0.013	mm	Outer Diameter Tolerance
L Tolerance	-0.2	mm	Length Tolerance
B Tolerance	-0.2	mm	Width Tolerance

LM150-AJ

LM150-AJ Specifications Table
Parameter	Value	Unit	Note
dr	150	mm	Shaft Diameter
D	210	mm	Outer Diameter
L	240	mm	Length
B	170.6	mm	Width
W	5.15	mm	Raceway Width
D1	204	mm	D1 Dimension
h	3	mm	h Dimension
h1	105	mm	h1 Dimension
θ	80	°	Contact Angle
Ball Circuit	8	个	Ball Circuit
Weight	20250	g	Weight
Eccentricity	40	μm	Eccentricity
Radial Clearance	-25	μm	Radial Clearance
C	24100	N	Basic Dynamic Load Rating
Co	54300	N	Basic Static Load Rating
dr Tolerance	-0.025	mm	Shaft Diameter Tolerance
D Tolerance	-0.029	mm	Outer Diameter Tolerance

LM16-AJ

LM16-AJ Specifications Table
Parameter	Value	Unit	Note
dr	16	mm	Shaft Diameter
D	28	mm	Outer Diameter
L	37	mm	Length
B	26.5	mm	Width
W	1.6	mm	Raceway Width
D1	27	mm	D1 Dimension
h	1.5	mm	h Dimension
h1	11	mm	h1 Dimension
θ	80	°	Contact Angle
Ball Circuit	5	个	Ball Circuit
Weight	76	g	Weight
Eccentricity	12	μm	Eccentricity
Radial Clearance	-6	μm	Radial Clearance
C	775	N	Basic Dynamic Load Rating
Co	1180	N	Basic Static Load Rating

LM20-AJ

LM20-AJ Specifications Table
Parameter	Value	Unit	Note
dr	20	mm	Shaft Diameter
D	32	mm	Outer Diameter
L	42	mm	Length
B	30.5	mm	Width
W	1.6	mm	Raceway Width
D1	30.5	mm	D1 Dimension
h	1.5	mm	h Dimension
h1	11	mm	h1 Dimension
θ	60	°	Contact Angle
Ball Circuit	5	个	Ball Circuit
Weight	100	g	Weight
Eccentricity	15	μm	Eccentricity
Radial Clearance	-6	μm	Radial Clearance
C	863	N	Basic Dynamic Load Rating
Co	1370	N	Basic Static Load Rating
dr Tolerance	-0.010	mm	Shaft Diameter Tolerance

LM25-AJ

LM25-AJ Specifications Table
Parameter	Value	Unit	Note
dr	25	mm	Shaft Diameter
D	40	mm	Outer Diameter
L	59	mm	Length
B	41	mm	Width
W	1.85	mm	Raceway Width
D1	38	mm	D1 Dimension
h	2	mm	h Dimension
h1	12	mm	h1 Dimension
θ	50	°	Contact Angle
Ball Circuit	5	个	Ball Circuit
Weight	240	g	Weight
Eccentricity	15	μm	Eccentricity
Radial Clearance	-6	μm	Radial Clearance
C	980	N	Basic Dynamic Load Rating
Co	1570	N	Basic Static Load Rating
dr Tolerance	-0.010	mm	Shaft Diameter Tolerance
D Tolerance	-0.016	mm	Outer Diameter Tolerance

LM30-AJ

LM30-AJ Specifications Table
Parameter	Value	Unit	Note
dr	30	mm	Shaft Diameter
D	45	mm	Outer Diameter
L	64	mm	Length
B	44.5	mm	Width
W	1.85	mm	Raceway Width
D1	43	mm	D1 Dimension
h	2.5	mm	h Dimension
h1	15	mm	h1 Dimension
θ	50	°	Contact Angle
Ball Circuit	6	个	Ball Circuit
Weight	270	g	Weight
Eccentricity	15	μm	Eccentricity
Radial Clearance	-8	μm	Radial Clearance
C	1570	N	Basic Dynamic Load Rating
Co	2750	N	Basic Static Load Rating

LM35-AJ

LM35-AJ Specifications Table
Parameter	Value	Unit	Note
dr	35	mm	Shaft Diameter
D	52	mm	Outer Diameter
L	70	mm	Length
B	49.5	mm	Width
W	2.1	mm	Raceway Width
D1	49	mm	D1 Dimension
h	2.5	mm	h Dimension
h1	17	mm	h1 Dimension
θ	50	°	Contact Angle
Ball Circuit	6	个	Ball Circuit
Weight	425	g	Weight
Eccentricity	20	μm	Eccentricity
Radial Clearance	-8	μm	Radial Clearance
C	1670	N	Basic Dynamic Load Rating
Co	3140	N	Basic Static Load Rating
dr Tolerance	-0.012	mm	Shaft Diameter Tolerance
D Tolerance	-0.019	mm	Outer Diameter Tolerance
L Tolerance	-0.3	mm	Length Tolerance
B Tolerance	-0.3	mm	Width Tolerance

LM40-AJ

LM40-AJ Specifications Table
Parameter	Value	Unit	Note
dr	40	mm	Shaft Diameter
D	60	mm	Outer Diameter
L	80	mm	Length
B	60.5	mm	Width
W	2.1	mm	Raceway Width
D1	57	mm	D1 Dimension
h	3	mm	h Dimension
h1	20	mm	h1 Dimension
θ	50	°	Contact Angle
Ball Circuit	6	个	Ball Circuit
Weight	654	g	Weight
Eccentricity	20	μm	Eccentricity
Radial Clearance	-10	μm	Radial Clearance
C	2162	N	Basic Dynamic Load Rating
Co	4020	N	Basic Static Load Rating

LM50-AJ

LM50-AJ Specifications Table
Parameter	Value	Unit	Note
dr	50	mm	Shaft Diameter
D	80	mm	Outer Diameter
L	100	mm	Length
B	74	mm	Width
W	2.6	mm	Raceway Width
D1	76.5	mm	D1 Dimension
h	3	mm	h Dimension
h1	25	mm	h1 Dimension
θ	50	°	Contact Angle
Ball Circuit	6	个	Ball Circuit
Weight	1000	g	Weight
Eccentricity	20	μm	Eccentricity
Radial Clearance	-13	μm	Radial Clearance
C	3820	N	Basic Dynamic Load Rating
Co	7940	N	Basic Static Load Rating
dr Tolerance	-0.015	mm	Shaft Diameter Tolerance
D Tolerance	-0.022	mm	Outer Diameter Tolerance

LM6-AJ

LM6-AJ Specifications Table
Parameter	Value	Unit	Note
dr	6	mm	Shaft Diameter
D	12	mm	Outer Diameter
L	19	mm	Length
B	13.5	mm	Width
W	1.1	mm	Raceway Width
D1	11.5	mm	D1 Dimension
h	1	mm	h Dimension
Ball Circuit	4	个	Ball Circuit
Weight	8.5	g	Weight
Eccentricity	12	μm	Eccentricity
Radial Clearance	-3	μm	Radial Clearance
C	206	N	Basic Dynamic Load Rating
Co	265	N	Basic Static Load Rating

LM60-AJ

LM60-AJ Specifications Table
Parameter	Value	Unit	Note
dr	60	mm	Shaft Diameter
D	90	mm	Outer Diameter
L	110	mm	Length
B	95	mm	Width
W	3.75	mm	Raceway Width
D1	86.5	mm	D1 Dimension
h	3	mm	h Dimension
h1	30	mm	h1 Dimension
θ	50	°	Contact Angle
Ball Circuit	6	个	Ball Circuit
Weight	2000	g	Weight
Eccentricity	25	μm	Eccentricity
Radial Clearance	-13	μm	Radial Clearance
C	4710	N	Basic Dynamic Load Rating
Co	10000	N	Basic Static Load Rating

LM8-AJ

LM8-AJ Specifications Table
Parameter	Value	Unit	Note
dr	8	mm	Shaft Diameter
D	15	mm	Outer Diameter
L	17	mm	Length
B	11.5	mm	Width
W	1.1	mm	Raceway Width
D1	14.3	mm	D1 Dimension
h	1	mm	h Dimension
Ball Circuit	4	个	Ball Circuit
Weight	11	g	Weight
Eccentricity	12	μm	Eccentricity
Radial Clearance	-3	μm	Radial Clearance
C	176	N	Basic Dynamic Load Rating
Co	225	N	Basic Static Load Rating
D Tolerance	-0.011	mm	Outer Diameter Tolerance

LM80-AJ

LM80-AJ Specifications Table
Parameter	Value	Unit	Note
dr	80	mm	Shaft Diameter
D	120	mm	Outer Diameter
L	140	mm	Length
B	105.5	mm	Width
W	4.15	mm	Raceway Width
D1	116	mm	D1 Dimension
h	3	mm	h Dimension
h1	40	mm	h1 Dimension
θ	50	°	Contact Angle
Ball Circuit	6	个	Ball Circuit
Weight	4320	g	Weight
Eccentricity	25	μm	Eccentricity
Radial Clearance	-20	μm	Radial Clearance
C	7350	N	Basic Dynamic Load Rating
Co	18000	N	Basic Static Load Rating

LMB10-AJ

LMB10-AJ Specifications Table
Parameter	Value	Unit	Note
dr	15.875	mm	Shaft Diameter
D	28.575	mm	Outer Diameter
L	38.1	mm	Length
B	28.04	mm	Width
W	1.422	mm	Raceway Width
D1	26.899	mm	D1 Dimension
h	1.5	mm	h Dimension
h1	9.525	mm	h1 Dimension
θ	80	°	Contact Angle
Ball Circuit	4	个	Ball Circuit
Weight	85	g	Weight
Eccentricity	12	μm	Eccentricity
Radial Clearance	-4	μm	Radial Clearance
C	1180	N	Basic Dynamic Load Rating

LMB12-AJ

LMB12-AJ Specifications Table
Parameter	Value	Unit	Note
dr	19.05	mm	Shaft Diameter
D	31.75	mm	Outer Diameter
L	41.275	mm	Length
B	29.61	mm	Width
W	1.422	mm	Raceway Width
D1	29.87	mm	D1 Dimension
h	1.5	mm	h Dimension
h1	11.1125	mm	h1 Dimension
θ	80	°	Contact Angle
Ball Circuit	5	个	Ball Circuit
Weight	104	g	Weight
Eccentricity	15	μm	Eccentricity
Radial Clearance	-6	μm	Radial Clearance
C	1370	N	Basic Dynamic Load Rating
dr Tolerance	0/-0.1016	mm	Shaft Diameter Tolerance

LMB16-AJ

LMB16-AJ Specifications Table
Parameter	Value	Unit	Note
dr	25.4	mm	Shaft Diameter
D	39.688	mm	Outer Diameter
L	57.15	mm	Length
B	44.57	mm	Width
W	1.727	mm	Raceway Width
D1	37.306	mm	D1 Dimension
h	1.5	mm	h Dimension
h1	14.2875	mm	h1 Dimension
θ	50	°	Contact Angle
Ball Circuit	6	个	Ball Circuit
Weight	220	g	Weight
Eccentricity	15	μm	Eccentricity
Radial Clearance	-6	μm	Radial Clearance
C	1570	N	Basic Dynamic Load Rating
dr Tolerance	0/-0.6452	mm	Shaft Diameter Tolerance

LMB20-AJ

LMB20-AJ Specifications Table
Parameter	Value	Unit	Note
dr	31.75	mm	Shaft Diameter
D	50.8	mm	Outer Diameter
L	66.675	mm	Length
B	50.92	mm	Width
W	2.182	mm	Raceway Width
D1	47.9	mm	D1 Dimension
h	2	mm	h Dimension
h1	15.875	mm	h1 Dimension
θ	50	°	Contact Angle
Ball Circuit	6	个	Ball Circuit
Weight	465	g	Weight
Eccentricity	20	μm	Eccentricity
Radial Clearance	-8	μm	Radial Clearance
C	2740	N	Basic Dynamic Load Rating
dr Tolerance	0/-0.127	mm	Shaft Diameter Tolerance

LMB24-AJ

LMB24-AJ Specifications Table
Parameter	Value	Unit	Note
dr	38.1	mm	Shaft Diameter
D	60.325	mm	Outer Diameter
L	76.2	mm	Length
B	61.26	mm	Width
W	2.184	mm	Raceway Width
D1	56.87	mm	D1 Dimension
h	3	mm	h Dimension
h1	19.05	mm	h1 Dimension
θ	50	°	Contact Angle
Ball Circuit	6	个	Ball Circuit
Weight	720	g	Weight
Eccentricity	20	μm	Eccentricity
Radial Clearance	-8	μm	Radial Clearance
C	4020	N	Basic Dynamic Load Rating

LMB32-AJ

LMB32-AJ Specifications Table
Parameter	Value	Unit	Note
dr	50.8	mm	Shaft Diameter
D	76.2	mm	Outer Diameter
L	101.6	mm	Length
B	81.07	mm	Width
W	2.616	mm	Raceway Width
D1	72.085	mm	D1 Dimension
h	3	mm	h Dimension
h1	25.4	mm	h1 Dimension
θ	50	°	Contact Angle
Ball Circuit	6	个	Ball Circuit
Weight	1310	g	Weight
Eccentricity	25	μm	Eccentricity
Radial Clearance	-13	μm	Radial Clearance
C	7940	N	Basic Dynamic Load Rating
dr Tolerance	-0.3048	mm	Shaft Diameter Tolerance

LMB4-AJ

LMB4-AJ Specifications Table
Parameter	Value	Unit	Note
dr	6.35	mm	Shaft Diameter
D	12.7	mm	Outer Diameter
L	19.05	mm	Length
B	12.98	mm	Width
W	0.992	mm	Raceway Width
D1	11.906	mm	D1 Dimension
h	1	mm	h Dimension
Ball Circuit	4	个	Ball Circuit
Weight	9.5	g	Weight
Eccentricity	12	μm	Eccentricity
Radial Clearance	-3	μm	Radial Clearance
C	265	N	Basic Dynamic Load Rating
D Tolerance	+0.2591/-0.7747	mm	Outer Diameter Tolerance

LMB6-AJ

LMB6-AJ Specifications Table
Parameter	Value	Unit	Note
dr	9.525	mm	Shaft Diameter
D	15.875	mm	Outer Diameter
L	22.225	mm	Length
B	16.13	mm	Width
W	0.992	mm	Raceway Width
D1	14.435	mm	D1 Dimension
h	1	mm	h Dimension
Ball Circuit	4	个	Ball Circuit
Weight	15	g	Weight
Eccentricity	12	μm	Eccentricity
Radial Clearance	-3	μm	Radial Clearance
C	314	N	Basic Dynamic Load Rating
dr Tolerance	0/-0.1016	mm	Shaft Diameter Tolerance

LMB8-AJ

LMB8-AJ Specifications Table
Parameter	Value	Unit	Note
dr	12.7	mm	Shaft Diameter
D	22.225	mm	Outer Diameter
L	31.75	mm	Length
B	24.46	mm	Width
W	1.166	mm	Raceway Width
D1	20.853	mm	D1 Dimension
h	1.5	mm	h Dimension
h1	7.9375	mm	h1 Dimension
θ	80	°	Contact Angle
Ball Circuit	4	个	Ball Circuit
Weight	42	g	Weight
Eccentricity	12	μm	Eccentricity
Radial Clearance	-4	μm	Radial Clearance
C	784	N	Basic Dynamic Load Rating
dr Tolerance	0/-0.2286	mm	Shaft Diameter Tolerance

LME12-AJ

LME12-AJ Specifications Table
Parameter	Value	Unit	Note
dr	12	mm	Shaft Diameter
D	22	mm	Outer Diameter
L	32	mm	Length
B	22.9	mm	Width
W	1.3	mm	Raceway Width
D1	21	mm	D1 Dimension
h	1.5	mm	h Dimension
h1	7.5	mm	h1 Dimension
θ	78	°	Contact Angle
Ball Circuit	4	个	Ball Circuit
Weight	45	g	Weight
Eccentricity	12	μm	Eccentricity
Radial Clearance	-4	μm	Radial Clearance
C	510	N	Basic Dynamic Load Rating
Co	784	N	Basic Static Load Rating
dr Tolerance	+0.008/0	mm	Shaft Diameter Tolerance
D Tolerance	0/-0.009	mm	Outer Diameter Tolerance
L Tolerance	-0.2/0	mm	Length Tolerance
B Tolerance	+0.2/-0.2	mm	Width Tolerance

LME16-AJ

LME16-AJ Specifications Table
Parameter	Value	Unit	Note
dr	16	mm	Shaft Diameter
D	26	mm	Outer Diameter
L	36	mm	Length
B	24.9	mm	Width
W	1.3	mm	Raceway Width
D1	24.9	mm	D1 Dimension
h	1.5	mm	h Dimension
h1	10	mm	h1 Dimension
θ	78	°	Contact Angle
Ball Circuit	5	个	Ball Circuit
Weight	60	g	Weight
Eccentricity	12	μm	Eccentricity
Radial Clearance	-4	μm	Radial Clearance
C	578	N	Basic Dynamic Load Rating
Co	892	N	Basic Static Load Rating
dr Tolerance	+0.009/0	mm	Shaft Diameter Tolerance
D Tolerance	0/-0.009	mm	Outer Diameter Tolerance
L Tolerance	-0.3/0	mm	Length Tolerance

LME20-AJ

LME20-AJ Specifications Table
Parameter	Value	Unit	Note
dr	20	mm	Shaft Diameter
D	32	mm	Outer Diameter
L	45	mm	Length
B	31.5	mm	Width
W	1.6	mm	Raceway Width
D1	30.5	mm	D1 Dimension
h	2	mm	h Dimension
h1	10	mm	h1 Dimension
θ	60	°	Contact Angle
Ball Circuit	5	个	Ball Circuit
Weight	102	g	Weight
Eccentricity	15	μm	Eccentricity
Radial Clearance	-6	μm	Radial Clearance
C	862	N	Basic Dynamic Load Rating
Co	1370	N	Basic Static Load Rating
dr Tolerance	+0.001/0	mm	Shaft Diameter Tolerance
D Tolerance	0/-0.011	mm	Outer Diameter Tolerance
L Tolerance	-0.3/0	mm	Length Tolerance

LME25-AJ

LME25-AJ Specifications Table
Parameter	Value	Unit	Note
dr	25	mm	Shaft Diameter
D	40	mm	Outer Diameter
L	58	mm	Length
B	44.1	mm	Width
W	1.85	mm	Raceway Width
D1	38	mm	D1 Dimension
h	2	mm	h Dimension
h1	12.5	mm	h1 Dimension
θ	60	°	Contact Angle
Ball Circuit	6	个	Ball Circuit
Weight	235	g	Weight
Eccentricity	15	μm	Eccentricity
Radial Clearance	-6	μm	Radial Clearance
C	980	N	Basic Dynamic Load Rating
Co	1570	N	Basic Static Load Rating
dr Tolerance	+0.011/0	mm	Shaft Diameter Tolerance
D Tolerance	0/-0.011	mm	Outer Diameter Tolerance
L Tolerance	-0.3/0	mm	Length Tolerance

LME30-AJ

LME30-AJ Specifications Table
Parameter	Value	Unit	Note
dr	30	mm	Shaft Diameter
D	47	mm	Outer Diameter
L	68	mm	Length
B	52.1	mm	Width
W	1.85	mm	Raceway Width
D1	44.5	mm	D1 Dimension
h	2	mm	h Dimension
h1	12.5	mm	h1 Dimension
θ	50	°	Contact Angle
Ball Circuit	6	个	Ball Circuit
Weight	360	g	Weight
Eccentricity	15	μm	Eccentricity
Radial Clearance	-8	μm	Radial Clearance
C	1378	N	Basic Dynamic Load Rating
Co	2740	N	Basic Static Load Rating
dr Tolerance	-0.001/0	mm	Shaft Diameter Tolerance
D Tolerance	0/-0.013	mm	Outer Diameter Tolerance
L Tolerance	-0.3/0	mm	Length Tolerance
B Tolerance	+0.3/-0.3	mm	Width Tolerance

LME40-AJ

LME40-AJ Specifications Table
Parameter	Value	Unit	Note
dr	40	mm	Shaft Diameter
D	62	mm	Outer Diameter
L	80	mm	Length
B	69.8	mm	Width
W	2.15	mm	Raceway Width
D1	59	mm	D1 Dimension
h	3	mm	h Dimension
h1	16.8	mm	h1 Dimension
θ	50	°	Contact Angle
Ball Circuit	6	个	Ball Circuit
Weight	720	g	Weight
Eccentricity	17	μm	Eccentricity
Radial Clearance	-8	μm	Radial Clearance
C	2176	N	Basic Dynamic Load Rating
Co	4200	N	Basic Static Load Rating
dr Tolerance	+0.013/0	mm	Shaft Diameter Tolerance
D Tolerance	0/-0.013	mm	Outer Diameter Tolerance
L Tolerance	-0.3/0	mm	Length Tolerance
B Tolerance	+0.4/0	mm	Width Tolerance

LME50-AJ

LME50-AJ Specifications Table
Parameter	Value	Unit	Note
dr	50	mm	Shaft Diameter
D	75	mm	Outer Diameter
L	100	mm	Length
B	77.7	mm	Width
W	2.65	mm	Raceway Width
D1	72	mm	D1 Dimension
h	3	mm	h Dimension
h1	21	mm	h1 Dimension
θ	50	°	Contact Angle
Ball Circuit	6	个	Ball Circuit
Weight	1015	g	Weight
Eccentricity	17	μm	Eccentricity
Radial Clearance	-13	μm	Radial Clearance
C	3820	N	Basic Dynamic Load Rating
Co	7940	N	Basic Static Load Rating
dr Tolerance	+0.002/0	mm	Shaft Diameter Tolerance
D Tolerance	0/-0.013	mm	Outer Diameter Tolerance
L Tolerance	-0.3/0	mm	Length Tolerance

LME60-AJ

LME60-AJ Specifications Table
Parameter	Value	Unit	Note
dr	60	mm	Shaft Diameter
D	90	mm	Outer Diameter
L	125	mm	Length
B	101.1	mm	Width
W	3.15	mm	Raceway Width
D1	86.5	mm	D1 Dimension
h	3	mm	h Dimension
h1	27.2	mm	h1 Dimension
θ	54	°	Contact Angle
Ball Circuit	6	个	Ball Circuit
Weight	2220	g	Weight
Eccentricity	20	μm	Eccentricity
Radial Clearance	-13	μm	Radial Clearance
C	4700	N	Basic Dynamic Load Rating
Co	9800	N	Basic Static Load Rating
D Tolerance	0/-0.015	mm	Outer Diameter Tolerance
L Tolerance	-0.4/0	mm	Length Tolerance
B Tolerance	+0.4/-0.4	mm	Width Tolerance

LME8-AJ

LME8-AJ Specifications Table
Parameter	Value	Unit	Note
dr	8	mm	Shaft Diameter
D	16	mm	Outer Diameter
L	25	mm	Length
B	16.5	mm	Width
W	1.1	mm	Raceway Width
D1	15.2	mm	D1 Dimension
h	1	mm	h Dimension
θ	78	°	Contact Angle
Ball Circuit	4	个	Ball Circuit
Weight	22	g	Weight
Eccentricity	12	μm	Eccentricity
Radial Clearance	-3	μm	Radial Clearance
C	265	N	Basic Dynamic Load Rating
Co	402	N	Basic Static Load Rating
dr Tolerance	+0.008/0	mm	Shaft Diameter Tolerance
D Tolerance	0/-0.008	mm	Outer Diameter Tolerance
L Tolerance	-0.2/0	mm	Length Tolerance
B Tolerance	+0.2/0	mm	Width Tolerance

Product Selection · Quick Quotes · Technical Support

MAOZE

Whether you need German precision spindles or domestic linear bearings, our technical team is at your service.

Online Consultation

LM-AJ Adjustable Clearance Series

LM-AJ Adjustable Clearance Series

Product Features

Features

Model Designation

Specifications

Long Service Life

Quiet Operation

Precise Tolerance

Low-Friction Travel

Long Service Life

Quiet Operation

Precise Tolerance

Low-Friction Travel

Dimensional Diagram

Specifications Table

Product Selection · Quick Quotes · Technical Support

Related Products

LM Standard Series Linear Bearing

LM-OP Open Type Series

LM-TH Compact Type